產品描述
額定電壓0.6/1kV、10k架空絕緣電纜
Aerial Insulated Cable with Rated Voltage of 0.6/1kV,10kV
- 用途 Application
本產品適用于城市街道和綠化地段、接近建筑物的架空線路，以及對供電安全和運行管理要求不斷提高的農村廣大地區。
It is suitable for city streets and green sector、overhead lines close to the building, as well as vast areas of rural, which
continuously demand to improve on power supply security and operational management.
- 產品型號及名稱 Type and Designation
JKV、JKLV或JKLHV | 銅芯、鋁芯或鋁合金芯聚氯乙烯絕緣架空電纜 Copper, aluminum or aluminum alloy conductor PVC insulated aerial cable | 執行標準 Standard |
JKY、JKTRY 、JKLY或JKLHY | 銅芯、鋁芯或鋁合金芯聚乙烯絕緣架空電纜 Copper, aluminum or aluminum alloy conductor PE insulated aerial cable | GB/T 12527 GB/T 14049 |
JKYJ、JKTRYJ 、 JKLYJ或JKLHYJ | 銅芯、鋁芯或鋁合金芯交聯聚乙烯絕緣架空電纜 Copper, aluminum or aluminum alloy conductor XLPE insulated aerial cable | |
JKLGV | 鋼芯鋁絞線導體聚氯乙烯絕緣架空電纜 ACSR conductor PVC insulated aerial cable | |
JKLGY | 鋼芯鋁絞線導體聚乙烯絕緣架空電纜 ACSR conductor PE insulated aerial cable | |
JKLGYJ | 鋼芯鋁絞線導體交聯聚乙烯絕緣架空電纜 ACSR conductor XLPE insulated aerial cable | |
JKLYJ/B 或JKLHYJ/B | 鋁芯或鋁合金芯本色交聯聚乙烯絕緣架空電纜 Aluminum or aluminum alloy conductor natural color XLPE insulated aerial cable | |
JKLYJ/Q 或JKLHYJ/Q | 鋁芯或鋁合金芯輕型交聯聚乙烯薄絕緣架空電纜 Aluminum or aluminum alloy conductor XLPE thin-insulated light duty aerial cable | |
JKLY/Q 或JKLHY/Q | 鋁芯或鋁合金芯輕型聚乙烯薄絕緣架空電纜 Aluminum or aluminum alloy conductor PE thin-insulated light duty aerial cable |
- 規格 Specification
型號 Type | 額定電壓 | 芯數 | 主線芯標稱截面mm 2 |
JKV、JKLV、JKLHV、JKY、JKLY、JKLHY、JKYJ、JKLYJ、JKLHYJ、JKLGV、JKLGY、 JKLGYJ | 0.6/1kV | 1 | 10~400 |
2、4 | 10~120 | ||
JKLV、JKLY、JKLYJ | 0.6/1kV | 3+Ka | 10~120 |
JKYJ、JKTRYJ、JKLYJ、JKLHYJ | 10kV | 1 | 10~400 |
3 | 25~400 | ||
3+Ka | 25~400 | ||
JKY、JKTRY、JKLY、JKLHY、JKLYJ/Q、JKLHYJ/Q | 10kV | 1 | 10~400 |
JKLYJ/B、JKLHYJ/B | 10kV | 3 | 25~400 |
JKYJ、JKTRYJ、JKLYJ、JKLHYJ | 35kV | 1 | 25~400 |
a輔助線芯K為承載絞線或帶承載的中性線芯。根據工程需要，可任選截面與主線芯搭配。 | |||
- 產品結構示意圖 Structural figure
1、導體 Conductor 2、絕緣 Insulation 3、導體屏蔽 Conductor shield
- 技術參數 Technical parameter
- 導體直流電阻符合GB/T 12527及GB/T14049規定。
Conductor DC resistance shall meet the stipulation in GB/T 12527&GB/T14049.
- 絕緣電阻符合GB/T 12527及GB/T14049規定。
Resistance of insulation shall meet the stipulation in GB/T 12527&GB/T14049.
- 0.6/1kV成品電纜經受交流50Hz、1min、3500V的電壓試驗不擊穿。
Cable with rated voltage of 0.6/1kV shall pass the AC voltage (50Hz、1min、3500V) test without breakdown.
- 10kV普通絕緣成品電纜經受交流50Hz、1min、18kV的電壓試驗不擊穿；
General insulated structure cable with rated voltage of 10kv shall pass the AC voltage (50Hz、1min、18kV) test without breakdown.
- 10kV輕薄型絕緣成品電纜經受交流50Hz、1min、12kV的電壓試驗不擊穿。
Light-duty thin-insulation structure Cable with rated voltage of 10kV shall pass the AC voltage (50Hz、1min、12kV) test without breakdown.
- 使用特性 Operating characteristics
- 電纜敷設溫度應不低于-20℃。
The temperature during cable installation shall not be less -20℃.
- 電纜導體的最高長期允許工作溫度為：PVC、PE絕緣70℃，XLPE絕緣90℃。
Maximum long-time permissible operation temperature：
70℃，for PVC and PE insulated；90℃，for XLPE insulated cable.
- 短路時(最長持續時間不超過5s)電纜的最高溫度為：PVC絕緣160℃，PE絕緣150℃，XLPE絕緣250℃。
Maximum temperature when cable is short-circuited (lasting not more than 5 seconds)：
160℃，for PVC insulated；150℃，for PE insulated cable；250℃，for XLPE insulated cable.
- 電纜的允許彎曲半徑：1kV電纜：電纜外徑D小于25mm者，應不小于4D；電纜外徑D為25mm及以上者，應不小于6D。
Allowable bending radius：Cable with rated voltage of 1kV：It shall not be less 4 times the cable’s outer diameter when the cable’s outer diameter is less than 25mm; it shall not be less than 6 times the cable’s outer diameter when the cable’s outer diameter is more than or equal to 25mm.
- 電纜的允許彎曲半徑：10kV電纜：單芯電纜不小于標稱外徑的20倍；多芯電纜不小于電纜外徑的15倍。
Allowable bending radius：Cable with rated voltage of 10kV：Single cable: shall not be less than20D;Multi-core cable: shall not be less than 15D(Note: ’D’ is the cable’s outer diameter).
產品詢價
填寫您的電話和E-mail信息，將有助于我們及時與您取得聯系，盡快解決您提出的問題。
